alex00100
Apr 13, 09:05 AM
hello forum.
i was going to buy 27" apple cinema display in a few months. but i saw that it has "Buy only if you need it - Approaching the end of a cycle" status in buyer's guide. i dont really need it so much and i can wait.
so when can it get updated? i havnt heard any rumors about it. and what is going to get improved?
i was going to buy 27" apple cinema display in a few months. but i saw that it has "Buy only if you need it - Approaching the end of a cycle" status in buyer's guide. i dont really need it so much and i can wait.
so when can it get updated? i havnt heard any rumors about it. and what is going to get improved?
Peter.Howard
Nov 13, 09:23 PM
you had my curious about the answer there to that,
I found this on google:
http://discussions.info.apple.com/thread.jspa?threadID=2025553&tstart=60
Sounds like you have system 6
and you need an 800k boot floppy
that shift key command only worked on system 7 onwards
I found this on google:
http://discussions.info.apple.com/thread.jspa?threadID=2025553&tstart=60
Sounds like you have system 6
and you need an 800k boot floppy
that shift key command only worked on system 7 onwards
tristangage
Aug 19, 01:38 PM
Pretty cool that you got it for free. I'd quite like an old iMac, to poke around it.
SchneiderMan
May 18, 06:24 PM
other Rumors mainly from the survey taken a while back seem's like there will be a Built in netflix app no disc needed more Facebook features First choice beta accesses and cloud service to store online saves etc.
I still won't tamt to pay for that crap.. All I want to do is fracking play multiplayer games!!
I still won't tamt to pay for that crap.. All I want to do is fracking play multiplayer games!!
more...
JackT06
Feb 6, 11:00 AM
Thanks for the suggestion. I noticed it has a scheduling feature which is nice and what I've been looking for. I have several other questions in relation to this:
What kind of hardware would I need for this, and what type of internet connection? Would a normal pc or a netbook with an attached higher quality webcam (thinking of going with a higher quality Logitech) be enough? What about bandwidth usage? Wouldn't I need a really fast upload connection if I'm planning on using a direct stream? Cable modem? FIOS? Or is there some service which allows you to stream to them and they relay to your site (similar to Justin.tv or Stream.tv, though I'd prefer not to deal with them in particular)?
I shall try and answer all of these to the best i can, but i can tell you now i'm no possessional on this!(:
I have done this a couple of times now, once just through my built in camera, the quality of the camera, is crap, but when i saw it on the internet i didn't think it was that bad. I have also used a high quality camera (cost me around �50) and the quality was fantastic, did lag at times, but you get that no matter where you go.
So, i would recommend you use an attached camera, but built in ones do work fine.
I'm affraid i don't know the full answer to how much bandwith it was using... HOWEVER, i can tell you that i was uploading it, while on sufering the web, and the effect wasn't that bad. I have also ran it through 3G on my phone, connected to my laptop, and it was OKAY but i couldn't load anything else.
I have allways used a wireless.
Sorry, but i have no experience on the other services, i did try using steam.tv but i got fed up with it.
May i also point out that the audio on it isn't very good.
What kind of hardware would I need for this, and what type of internet connection? Would a normal pc or a netbook with an attached higher quality webcam (thinking of going with a higher quality Logitech) be enough? What about bandwidth usage? Wouldn't I need a really fast upload connection if I'm planning on using a direct stream? Cable modem? FIOS? Or is there some service which allows you to stream to them and they relay to your site (similar to Justin.tv or Stream.tv, though I'd prefer not to deal with them in particular)?
I shall try and answer all of these to the best i can, but i can tell you now i'm no possessional on this!(:
I have done this a couple of times now, once just through my built in camera, the quality of the camera, is crap, but when i saw it on the internet i didn't think it was that bad. I have also used a high quality camera (cost me around �50) and the quality was fantastic, did lag at times, but you get that no matter where you go.
So, i would recommend you use an attached camera, but built in ones do work fine.
I'm affraid i don't know the full answer to how much bandwith it was using... HOWEVER, i can tell you that i was uploading it, while on sufering the web, and the effect wasn't that bad. I have also ran it through 3G on my phone, connected to my laptop, and it was OKAY but i couldn't load anything else.
I have allways used a wireless.
Sorry, but i have no experience on the other services, i did try using steam.tv but i got fed up with it.
May i also point out that the audio on it isn't very good.
zedsdead
Feb 24, 06:38 AM
It could, but it doesn't have that much space. I would hook it up to an external raid array.
I would recommend a Drobo S. (http://www.drobo.com/products/drobo-s.php)
It is not cheep, but I have 9 gigs of drives in it, 6 available. Great product, keeps your data safe, it's fast, and easily expandable.
I would recommend a Drobo S. (http://www.drobo.com/products/drobo-s.php)
It is not cheep, but I have 9 gigs of drives in it, 6 available. Great product, keeps your data safe, it's fast, and easily expandable.
more...
Shebasher
Oct 22, 04:16 PM
I am interested in buying a new multifunction printer/scanner. I've seen a couple of posts talking about printers alone, but not together. The salesman at Best Buy was trying to get me to buy a EPSON Stylus Photo RX600. Has anyone bought and/or used this before?
rdowns
Jun 15, 04:35 PM
For the life of me, I can't understand why so many "articles" from Macenstein are reposted here.
more...
Fubar1977
Feb 21, 07:22 AM
Official Apple anything is expensive.
Never buy memory/HDD upgrades etc. from Apple, that logo on the box will add about 75% to the real price.
Never buy memory/HDD upgrades etc. from Apple, that logo on the box will add about 75% to the real price.
mrapplegate
Apr 11, 12:01 PM
Yup, I tried fixing the permissions, says the group was 0 instead of 80. After that and I reboot same thing :mad:
During a verbose boot does it hang on the same thing each time?
During a verbose boot does it hang on the same thing each time?
more...
drew0020
Jun 18, 10:31 AM
The southpark mall in Charlotte NC opens at 6am and only one door opens at that time. So I am getting there around 5:30am. Maybe I'll get lucky and no one will show up that early :)
Make sure you give us updates on the line :) I will be there between 7-8am if AT&T screwed up my pre-order...
Make sure you give us updates on the line :) I will be there between 7-8am if AT&T screwed up my pre-order...
wdlove
Sep 23, 01:14 PM
It seems that we will have to wait for the official word from Apple. I hope that it isn't closed for good though.
more...
rnelan7
Dec 30, 09:48 AM
I can agree with the OP. The other day at BestBuy they didn't have 4gb in stock but I managed to find one. Thinking I was the man by finding the last and hidden 4gb only to get to the register to have it rung up at $240. Turns out it was one of those bundles that came with three lego games. :(
simsaladimbamba
Apr 23, 07:36 AM
It could be as simple as that? There isn't anything that stands out as a concrete reason why it wouldn't work?
Should I try upgrading to leopard first and then Snow Leopard? I don't have the "upgrade disc" I have the full install one that came with my other Mac.
Get the 29 USD Mac OS X 10.6 Snow Leopard Upgrade DVD. It will work. The DVD you have is model specific and will not work with other Mac models.
Should I try upgrading to leopard first and then Snow Leopard? I don't have the "upgrade disc" I have the full install one that came with my other Mac.
Get the 29 USD Mac OS X 10.6 Snow Leopard Upgrade DVD. It will work. The DVD you have is model specific and will not work with other Mac models.
more...
pknz
Jul 29, 08:12 PM
Well they eventually went on sale at midday in NZ (finally).
I ended up queuing up outside Vodafone in St Lukes Westfield Mall. I was the first in the line that began at around 11am with another guy (don't know the name sorry). Ended up being about 30-50 people by midday.
Got myself a nice 32GB on contract.
I ended up queuing up outside Vodafone in St Lukes Westfield Mall. I was the first in the line that began at around 11am with another guy (don't know the name sorry). Ended up being about 30-50 people by midday.
Got myself a nice 32GB on contract.
WannabeSQ
Jul 1, 12:34 PM
I have a Digidesign Pro Tools Card, the Digi 001 and am thinking about upgrading to the G5, even though Digidesign hasn't "approved" the new machines yet (they still haven't approved the FW800 MDDs yet...)
But I read something about PCI-X slots and that they wont work with some older PCI cards, which types of cards won't work in a PCI-X slot? More specifically, would the Digi 001 work?
But I read something about PCI-X slots and that they wont work with some older PCI cards, which types of cards won't work in a PCI-X slot? More specifically, would the Digi 001 work?
more...
sbddude
May 4, 07:07 PM
Hello World, my first post on macrumors
I tried searching but most of the information was not in recent time, so figured to post a new thread.
I bought a used 3GS 8GB yesterday from a person. The phone is unlocked and jailbroken.
Here is the relevant information:
Version: 4.3.2 (8H7)
Model: MC640LL
Modem Firmware (baseband, i think): 06.15.00
Currently I am using it with T-Mobile, so I know it is unlocked properly.
My question is....
The phone has apps and settings from the previous user. I want to 'reset' or 'restore' or something like that to remove all settings and content from previous user.
If I go to Settings --> General --> Reset and perform a reset, will my phone still be usable with T-Mobile?
Thank you all. Hope I provided enough info to answer.
you need to restor with custom firmware, because of the 6.15.00 baseband.
then jailbreak and install ultrasnow.
hurry up because 4.3.3 was released and might not be jailbreakable.
if you have SHSH for 4.3.2. or anything earlier, you will be OK.
I tried searching but most of the information was not in recent time, so figured to post a new thread.
I bought a used 3GS 8GB yesterday from a person. The phone is unlocked and jailbroken.
Here is the relevant information:
Version: 4.3.2 (8H7)
Model: MC640LL
Modem Firmware (baseband, i think): 06.15.00
Currently I am using it with T-Mobile, so I know it is unlocked properly.
My question is....
The phone has apps and settings from the previous user. I want to 'reset' or 'restore' or something like that to remove all settings and content from previous user.
If I go to Settings --> General --> Reset and perform a reset, will my phone still be usable with T-Mobile?
Thank you all. Hope I provided enough info to answer.
you need to restor with custom firmware, because of the 6.15.00 baseband.
then jailbreak and install ultrasnow.
hurry up because 4.3.3 was released and might not be jailbreakable.
if you have SHSH for 4.3.2. or anything earlier, you will be OK.
jefhatfield
Nov 29, 12:42 AM
hi john123,
i saw a post or two from kela after you left
eyelikeart is still one of the top posters
and i hope to hear from an incarnation, at least a more polite one, of spikey
monkeybusiness has not been around for awhile and you were still heavily here when anonymous poster and anonymous coward left the fold
blakespot does not come around much anymore
but it's really great to see you back
i have had to get used to new waves of posters every three months or so, but if you give the new high end contributers a chance, you may find that you like them
i saw a post or two from kela after you left
eyelikeart is still one of the top posters
and i hope to hear from an incarnation, at least a more polite one, of spikey
monkeybusiness has not been around for awhile and you were still heavily here when anonymous poster and anonymous coward left the fold
blakespot does not come around much anymore
but it's really great to see you back
i have had to get used to new waves of posters every three months or so, but if you give the new high end contributers a chance, you may find that you like them
drenline
Apr 6, 02:27 AM
I wish my iPad battery was always stuck at 100%, that way, I would never need to charge my iPad.
teflon
Apr 20, 07:27 PM
It's just that I'm in New York right now but I won't be in about two months. So the two months prior to my move in date I won't be in the city. I thought I could start the search now and be able to check out the place in person and sign the paperwork and whatnot.
The landlord said she has a current tenant whose lease is up a month before I move in, so my move in date works. However, I'm not allowed to see the place because there's someone living there right now and they have a "privacy policy." Is this normal?
However on her listings on the websites, one said the availability was Apr.1, and one said "now." So either she hasn't taken down the listings, or she is already looking for her next tenant? I have no idea how the whole renting thing works.
She did agree to meet face to face though. Should I ask her to bring some documents? Ownership papers perhaps?
The landlord said she has a current tenant whose lease is up a month before I move in, so my move in date works. However, I'm not allowed to see the place because there's someone living there right now and they have a "privacy policy." Is this normal?
However on her listings on the websites, one said the availability was Apr.1, and one said "now." So either she hasn't taken down the listings, or she is already looking for her next tenant? I have no idea how the whole renting thing works.
She did agree to meet face to face though. Should I ask her to bring some documents? Ownership papers perhaps?
digitalbiker
Sep 29, 10:16 AM
Export to Quicktime presentation, install Quicktime on PCs.
edit: kayjprod beat me to it.
This method has a lot of drawbacks.
First, it generates huge files. All transitions are movies rather than a slide that is just rotated by a graphics program.
Second, You loose a lot of control over the presentation. Flipping back and forth between slides, cursor control, animation timing, etc.
Third, The final movie never looks as good for some reason. Maybe it is just a matter of changing parameters somewhere but my files are huge and my transitions, slides, fonts,etc. don't look as high res or clear.
I agree that Keynote needs a freely distributable player like PowerPoint has. This would allow you to send the condensed slide-only file to the OS X or Windows user and he or she would have the same control and effects over the presentation as in Keynote. QT just isn't the same as the PowerPoint freely distributed player on Windows.
edit: kayjprod beat me to it.
This method has a lot of drawbacks.
First, it generates huge files. All transitions are movies rather than a slide that is just rotated by a graphics program.
Second, You loose a lot of control over the presentation. Flipping back and forth between slides, cursor control, animation timing, etc.
Third, The final movie never looks as good for some reason. Maybe it is just a matter of changing parameters somewhere but my files are huge and my transitions, slides, fonts,etc. don't look as high res or clear.
I agree that Keynote needs a freely distributable player like PowerPoint has. This would allow you to send the condensed slide-only file to the OS X or Windows user and he or she would have the same control and effects over the presentation as in Keynote. QT just isn't the same as the PowerPoint freely distributed player on Windows.
maflynn
Apr 28, 06:47 AM
Strange. SL works on all my stuff without ever crashing, including my Hackintosh.
Me too, it works on my hackintosh. Yet with that said, I'd say that SL was not one of apple's greatest OS upates. I did have more issues initially with this then prior versions and had to hold off longer because of those problems then other versions of OSX.
While its been clearly documented that apple did a lot of under the hood type stuff. SL offered very little for the consumer. i think apple knew this when thy priced it much less then prior versions. 25 bucks vs. 125.
Me too, it works on my hackintosh. Yet with that said, I'd say that SL was not one of apple's greatest OS upates. I did have more issues initially with this then prior versions and had to hold off longer because of those problems then other versions of OSX.
While its been clearly documented that apple did a lot of under the hood type stuff. SL offered very little for the consumer. i think apple knew this when thy priced it much less then prior versions. 25 bucks vs. 125.
bilestyle
Sep 3, 03:25 PM
Sick of applescript programs for video conversion, here's my new Cocoa app written entirely in Objective-C, multithreaded, to encode a variety of movie formats into vcd mpeg1/svcd mpeg2, xvcd, xsvcd, and DVD ready for DVD Studio Pro format.
Digital Schism webpage:
http://homepage.mac.com/digitalschism/choice.html
Download Link:
http://homepage.mac.com/digitalschism/echelon.dmg
There is a variety of different options available for todays media afficianado, we find the format to be trusted by the experts, and that maintains the widest range of compatability is MPEG. (Specifically MPEG-1 and MPEG-2)
It has become clear to us that it isn't as easy as it should be to convert the wide array of available media formats to (S/X)VCD/DVD. In an effort to answer a large demand for a simple to use program that encompasses the large spectrum of options available to the Macintosh platform we are proud to bring you Echelon.
Convert multiple files
Echelon delivers the capability of converting a large queue list of files to a variety of different MPEG based formats (MPEG-1 and MPEG-2). It aims to employ all the complex video tools in one easy to use program.
Limitless customization
In an effort to accomodate your personal needs each file maintains its own individual settings. It is also possible to save your favorite presets for future usage.
Fast, Reliable, Simple
We have put in endless hours of research to only allow conversion methods that will solely yield usable end products. We aim to have a harmonious blend of intuitition and simplicity, the things you have come to expect as a Macintosh user.
Advanced User Features
In an effort to meet the needs of the varied levels of experience within our userbase we have implemented an array of advanced features for each encoder included.
Realtime Preview
In addition to intuitive graphical and textual progress indication, the user has the freedom to view the actual frames of video as they are encoded.
Multiple Effect Filters
From adjusting gamma (to be implemented later), to deinterlacing, to denoising we attempted to supply all the necessary effect filters for any of your desired outcomes.
World friendly
We will be localizing Echelon in multiple languages, and are up to suggestion for any localizations we didn't cover, dont hesitate to contact us with more language suggestions.
Digital Schism webpage:
http://homepage.mac.com/digitalschism/choice.html
Download Link:
http://homepage.mac.com/digitalschism/echelon.dmg
There is a variety of different options available for todays media afficianado, we find the format to be trusted by the experts, and that maintains the widest range of compatability is MPEG. (Specifically MPEG-1 and MPEG-2)
It has become clear to us that it isn't as easy as it should be to convert the wide array of available media formats to (S/X)VCD/DVD. In an effort to answer a large demand for a simple to use program that encompasses the large spectrum of options available to the Macintosh platform we are proud to bring you Echelon.
Convert multiple files
Echelon delivers the capability of converting a large queue list of files to a variety of different MPEG based formats (MPEG-1 and MPEG-2). It aims to employ all the complex video tools in one easy to use program.
Limitless customization
In an effort to accomodate your personal needs each file maintains its own individual settings. It is also possible to save your favorite presets for future usage.
Fast, Reliable, Simple
We have put in endless hours of research to only allow conversion methods that will solely yield usable end products. We aim to have a harmonious blend of intuitition and simplicity, the things you have come to expect as a Macintosh user.
Advanced User Features
In an effort to meet the needs of the varied levels of experience within our userbase we have implemented an array of advanced features for each encoder included.
Realtime Preview
In addition to intuitive graphical and textual progress indication, the user has the freedom to view the actual frames of video as they are encoded.
Multiple Effect Filters
From adjusting gamma (to be implemented later), to deinterlacing, to denoising we attempted to supply all the necessary effect filters for any of your desired outcomes.
World friendly
We will be localizing Echelon in multiple languages, and are up to suggestion for any localizations we didn't cover, dont hesitate to contact us with more language suggestions.
mjstew33
Dec 6, 07:29 AM
I had the 400 iMac DV SE, and I just put in a 500MHz w/ a better grphx card (was on the 500mhz mobo) and it runs like a charm. Just get the mobo off eBay and there ya go! ;)
