job
Nov 20, 11:16 PM
Originally posted by john123
Ya'll don't know me ?!?! I don't know any of you !!!
Where are jefhatfield? Spikey? Kela? The old crowd?
Are they all gone for good? Say it isn't so!
jefhatfield is still around.
I dunno about the rest though.
I think the rest are gone.
Ya'll don't know me ?!?! I don't know any of you !!!
Where are jefhatfield? Spikey? Kela? The old crowd?
Are they all gone for good? Say it isn't so!
jefhatfield is still around.
I dunno about the rest though.
I think the rest are gone.
jbomber
Jul 2, 03:00 AM
Originally posted by iJon
its coming, its called expose.
iJon
seems like it'd be relatively easy tho, y'know? kinda surprised that it was never considered til Expose.
its coming, its called expose.
iJon
seems like it'd be relatively easy tho, y'know? kinda surprised that it was never considered til Expose.
CaptainChunk
Apr 26, 03:24 AM
If you're in the UK, your best bet will probably be Crucial, as they run a UK web store. Crucial sells the proper modules with Apple-approved heatsinks.
�235.19 inc. VAT for two 4GB sticks (8GB kit). Not exactly cheap, but really, it's only about 10% more than what I would pay for the same thing in the States, after I factor in tax (which Crucial charges in my state), based on the currency exchange rate.
http://www.crucial.com/uk/store/listparts.aspx?model=Mac%20Pro%20%288-core%20Xeon%205400%20Series%29%202nd%20Gen.%20Early%202008&pl=Apple&cat=RAM
OWC and Trans Intl are always cheaper than Crucial, ASSUMING you live in the US. But the shipping and customs would kill you as a UK resident and they would cost more than Crucial in the end.
As said before, FB-DIMMs are expensive and chances are, they'll probably never decrease in price, but perhaps even increase over time.
�235.19 inc. VAT for two 4GB sticks (8GB kit). Not exactly cheap, but really, it's only about 10% more than what I would pay for the same thing in the States, after I factor in tax (which Crucial charges in my state), based on the currency exchange rate.
http://www.crucial.com/uk/store/listparts.aspx?model=Mac%20Pro%20%288-core%20Xeon%205400%20Series%29%202nd%20Gen.%20Early%202008&pl=Apple&cat=RAM
OWC and Trans Intl are always cheaper than Crucial, ASSUMING you live in the US. But the shipping and customs would kill you as a UK resident and they would cost more than Crucial in the end.
As said before, FB-DIMMs are expensive and chances are, they'll probably never decrease in price, but perhaps even increase over time.
maflynn
Apr 8, 12:33 PM
Given that apple added TRIM support in SL (and there's an easy hack to enable it for non-apple SSDs), I'd say its a slam dunk to think it will be in Lion
more...
Vector
Jul 3, 05:14 PM
I have jaguar running on my wallstreet 233 and it works fine and is very stable. I do not use it as my main computer anymore but it works fine when i need it. Freehand and Photoshop run fine on it as do less intensive apps, although long actions in ps can get tedious.
I wouldn't be surprised to see a hack for panther once it comes out unless there is some large hardware/firmware problem to overcome.
I wouldn't be surprised to see a hack for panther once it comes out unless there is some large hardware/firmware problem to overcome.
5300cs
Sep 24, 10:11 PM
I believe this is a continuing love saga.
Er, I thought MyMemory was getting maried though :confused:
Er, I thought MyMemory was getting maried though :confused:
more...
chrono1081
Mar 27, 11:19 PM
So even though I don't shoot weddings generally* one thing I've noticed anytime I do is that there is never a good amount of time given to the photographer. (Wedding photogs can attest to this!).
Anyway this last weekend I was at my sisters wedding. They rented a mansion in the middle of the Arizona desert and it was the first wedding that was actually enjoyable! No stress. There were a million incidents that would be traditionally considered "screwups" (the bride and groom seeing each other and hanging out before the ceremony, the bride getting crap all over her dress, the couple kissing before they even gave wedding vows. etc) the list goes on and on.
Anyway the bride didn't care about any of that, the groom didn't care about any of that, and it was the first wedding I've been to where the focus was on celebration not ceremony. It was fantastic....and...thankfully they took my advice and gave their wedding photographer three HOURS of photo shoot time before the ceremony! He and his assistants got so many great shots as I watched in envy only dreaming of what could be done with that amount of time. (The most time I was ever given was 25 minutes.)
The wedding was outside too so there were a ton of awesome opportunities, and even inside the lighting was really good. Needless to say I could only dream of shooting a wedding in such a place! (Although the thought of shooting weddings is generally a nightmare :P )
Anyway there is not much to this post but I thought Id share about the awesome conditions the photog got to shoot in. Anyone else ever get lucky with that much time during a wedding?
*The only time I shot weddings by myself is for friends who had no money for a photog and were going to rely on a family friend with a point and shoot. I hate the stress and pressure of shooting weddings but will usually go back up a friend if they do a wedding shoot. I have a lot of photog friends and have acted as a secondary for many of them if they need the help.
Anyway this last weekend I was at my sisters wedding. They rented a mansion in the middle of the Arizona desert and it was the first wedding that was actually enjoyable! No stress. There were a million incidents that would be traditionally considered "screwups" (the bride and groom seeing each other and hanging out before the ceremony, the bride getting crap all over her dress, the couple kissing before they even gave wedding vows. etc) the list goes on and on.
Anyway the bride didn't care about any of that, the groom didn't care about any of that, and it was the first wedding I've been to where the focus was on celebration not ceremony. It was fantastic....and...thankfully they took my advice and gave their wedding photographer three HOURS of photo shoot time before the ceremony! He and his assistants got so many great shots as I watched in envy only dreaming of what could be done with that amount of time. (The most time I was ever given was 25 minutes.)
The wedding was outside too so there were a ton of awesome opportunities, and even inside the lighting was really good. Needless to say I could only dream of shooting a wedding in such a place! (Although the thought of shooting weddings is generally a nightmare :P )
Anyway there is not much to this post but I thought Id share about the awesome conditions the photog got to shoot in. Anyone else ever get lucky with that much time during a wedding?
*The only time I shot weddings by myself is for friends who had no money for a photog and were going to rely on a family friend with a point and shoot. I hate the stress and pressure of shooting weddings but will usually go back up a friend if they do a wedding shoot. I have a lot of photog friends and have acted as a secondary for many of them if they need the help.
Dwalls90
Apr 12, 10:30 PM
Yea sent it in as bug ... may not be isolated to 10.7, as other threads have come up in the past month since iOS 4.3.1 and iTunes 10.2.1
:mad:
:mad:
more...
Zen0Jin
May 6, 01:00 PM
The 6970 came out this year.
@OP: Yes it will handle decent gaming for about that time, but expect that you may have to play future games at slightly lower setting over the time.
No, the 6970 is a 2 year old card. It may have come OUT this year.
@OP: Yes it will handle decent gaming for about that time, but expect that you may have to play future games at slightly lower setting over the time.
No, the 6970 is a 2 year old card. It may have come OUT this year.
thequicksilver
Jan 10, 11:53 AM
Yes, amongst many others.
http://www.mozilla.org/support/firefox/keyboard
Interestingly, the tab shifting buttons they mention in this doesn't work in my Firefox 1.0. I have to use ctrl-page up/dn as opposed to cmd-pageup/dn.
(I keep getting told the server is too busy, so hope this only posts once.)
http://www.mozilla.org/support/firefox/keyboard
Interestingly, the tab shifting buttons they mention in this doesn't work in my Firefox 1.0. I have to use ctrl-page up/dn as opposed to cmd-pageup/dn.
(I keep getting told the server is too busy, so hope this only posts once.)
more...
uplusd
May 3, 03:16 AM
As a previous poster mentioned, easiest to use CCC to move your current installation of OS X over to the SSD... See here for instructions:
http://lifehacker.com/#!5541774/how-to-install-a-solid+state-drive-in-your-macbook
http://lifehacker.com/#!5541774/how-to-install-a-solid+state-drive-in-your-macbook
Transporteur
Apr 12, 10:03 AM
Nope. No boot support for OS X as of yet.
more...
Mr. Retrofire
Apr 11, 10:30 AM
=====-----=====
It's weird, My MacBook Pro now wont boot into OS X lion, before the login screen it shows the mouse for a second and now it sticks at blue. :o
=====-----=====
From http://support.apple.com/kb/ht1564
(Mac OS X: What is Safe Boot, Safe Mode?)
"Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache."
=====-----=====
From http://support.apple.com/kb/ht1455
(Mac OS X: Starting up in Safe Mode)
"To start up into Safe Mode (to Safe Boot), do this:
1. Be sure your Mac is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
4. Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear)."
=====-----=====
:)
=====-----=====
It's weird, My MacBook Pro now wont boot into OS X lion, before the login screen it shows the mouse for a second and now it sticks at blue. :o
=====-----=====
From http://support.apple.com/kb/ht1564
(Mac OS X: What is Safe Boot, Safe Mode?)
"Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache."
=====-----=====
From http://support.apple.com/kb/ht1455
(Mac OS X: Starting up in Safe Mode)
"To start up into Safe Mode (to Safe Boot), do this:
1. Be sure your Mac is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
4. Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear)."
=====-----=====
:)
=====-----=====
design-is
Apr 12, 02:42 PM
...file > export > layouts as project > pick version 8. Will this work in 8.5?
Yes, should do :)
All versions of QuarkXpress should open docs which were created with earlier versions. Though there is the occasional passport / multi-langauage version problem which is just a pain in the bum: "This is a multiple language document and can only be opened in QuarkXPress Passport. [287]" �*but that's a different topic entirely.
Yes, should do :)
All versions of QuarkXpress should open docs which were created with earlier versions. Though there is the occasional passport / multi-langauage version problem which is just a pain in the bum: "This is a multiple language document and can only be opened in QuarkXPress Passport. [287]" �*but that's a different topic entirely.
more...
maflynn
Feb 2, 09:53 AM
Yeh but ...... "every other sandy bridge computer is a 'PC' and Dell/HP appear to have more stock (sandy bridge) or in the process of ramping up production, when the news broke.
Yep and they'll have to right off that stock and/or get intel to cover the cost. The point is that this affects every computer maker. I'd not really single out one or two makers. What about Lenovo, they have sandy bridge computers, or Acer, Asus, or Gateway?
Yep and they'll have to right off that stock and/or get intel to cover the cost. The point is that this affects every computer maker. I'd not really single out one or two makers. What about Lenovo, they have sandy bridge computers, or Acer, Asus, or Gateway?
shenfrey
May 6, 02:50 PM
http://store.apple.com/uk/product/MB110Z/A?fnode=MTY1NDA1Mg&mco=MTE0MDIyODA
more...
johnnj
Apr 22, 03:50 PM
Thanks again. :)
NP. Good luck.
NP. Good luck.
Designer Dale
Nov 3, 05:48 PM
Not really. It has the same constraints as uploading a photo directly to MR. Size limit is 1.14MB at 600px by 600px. You could create a custom Export setting in A3 to match these requirements, but you would still need to Export them to a folder on your computer and pull them to your Album from there. Not automatic, but a workaround.
Dale
Dale
matteusclement
Mar 27, 02:02 PM
the challenge is the 3 ring port in the iphone. i don't know which ones lead to what function. there is only one site out there that I can find but it gives you the ability to shoot with an XLR mic.
harpster
Apr 30, 08:38 AM
Mysql is the database language and PHP is the server side programming language that is most commonly used to interface the html form to the database. If you want to learn that just get a book like one of the Visual Quickstart Guides by Larry Ullman for Mysql & PHP. There are many books like this and online tutorials as well. Be prepared to spend some time on this if that's the direction your headed.
You should also get a local server set up on your computer. MAMP for Mac or WAMP for Windows. They are free and give you a easy way to develop dynamic web sites without having a hosting account. Later you can move the site to a live web host.
The other option is to use something like Wordpress where you can host for free and use one of the Form plugin's to make your form and store the results without having to know the code to make it happen.
You should also get a local server set up on your computer. MAMP for Mac or WAMP for Windows. They are free and give you a easy way to develop dynamic web sites without having a hosting account. Later you can move the site to a live web host.
The other option is to use something like Wordpress where you can host for free and use one of the Form plugin's to make your form and store the results without having to know the code to make it happen.
brn2ski00
Jun 23, 06:05 PM
Sold three iPod socks to zea mays. She bought the green, blue and purple. Thanks!
Still more socks/items available!
Still more socks/items available!
CBlakeston
Jan 20, 05:20 PM
There was an Epson Printer update too wasn't there?
blumie607
Feb 23, 05:46 PM
I'm getting the same "sql_mode" error message. Must be a problem in the software.
I'm trying to access a remote host.
I'm trying to access a remote host.
tekkierich
Feb 18, 10:55 AM
Hi Guys & Gals,
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
